How much does a well pump replacement cost?

A well pump replacement cost in Central Florida depends on the type of pump, the depth of the well, and whether the pressure tank or controls also need work.

What affects well pump replacement cost?

The biggest factor is what kind of pump you have. A residential jet pump, a submersible well pump, an irrigation pump, or a commercial turbine pump can all involve different parts and labor. In some cases, the pump is the only failed component; in others, the job also includes the pressure tank, pressure switch, wiring, or control components.

At Dunham Well Drilling, we handle pump repair and installation for residential, irrigation, industrial, and commercial systems. We also rebuild pumps and turbines in-house in our full-line machine shop, which can matter when a repair is possible instead of a full replacement.

Other cost factors include:

• Pump size and type
• Depth of the well
• Condition of the drop pipe, wiring, and controls
• Whether the pressure tank needs replacement
• Whether the system needs troubleshooting before parts are changed
• Brand and availability of the replacement pump

If the well itself has a deeper issue, or the pump failure is tied to lightning damage, the scope can grow beyond a simple swap. For example, a lightning strike can damage the pump, motor, pressure switch, and control components at the same time.

Signs your well pump may need replacement

A pump does not always fail all at once. Sometimes the warning signs show up first.

Common signs include:

• Low water pressure
• No water at all
• Pump cycling on and off too often
• Air spurting from faucets
• A breaker that keeps tripping
• Strange noises from the pump area
• Water that becomes inconsistent during normal use

If you notice these symptoms, call. Electrical service, pressure tanks, and well components should not be handled as DIY projects. A proper diagnosis can save you from replacing the wrong part.

Repair or replace: what makes more sense?

Not every pump problem means a full replacement. If the motor is damaged, the impeller is worn, or the controls are failing, a repair may be enough. If the pump is old, inefficient, or repeatedly failing, replacement may be the better long-term choice.

We work on residential pumps, irrigation pumps, and pressure tanks, and we carry Goulds, Sta-Rite, Grundfos, and Schaefer new and used. That gives us options when matching the right pump to the job.

When replacement is usually the better move

Replacement is often the better choice when:

• The pump is beyond economical repair
• The motor has failed and the unit is heavily worn
• The system is undersized for current water demand
• Parts are no longer practical to source
• The pump has failed more than once in a short time

For irrigation systems, it may also make sense to review the whole setup. A pump that is not matched to the system can cause pressure problems and shorten equipment life.

What a full replacement may include

A well pump replacement is not always just the pump itself. Depending on the system, the job may include related parts and labor.

Possible components include:

• New pump
• Motor
• Pressure tank
• Pressure switch
• Check valve
• Wiring or control components
• Drop pipe or fittings

If the issue started after a storm, our lightning damage repair service can help with pump and motor repair, irrigation electrical repair, pressure-switch replacement, and well casing damage assessment. We also work directly with your insurance company on the claim.

Why Central Florida wells need the right pump setup

Polk County and Central Florida wells deal with local geology, changing water levels, and heavy irrigation demand. That is why proper sizing matters so much. A pump that is too small may struggle to keep up, while one that is oversized can create more wear and poor performance.

As a Licensed Water Well Drilling Contractor and FGWA member, we understand the regional conditions that affect well systems here. We have been working in Polk County aquifer geology for generations, and that experience helps when selecting the right pump for the job.

If your problem is tied to a new installation or a failing older well, our water well drilling service covers new wells for residential, agricultural, and commercial properties across Central Florida.

How to save money on well pump replacement

The best way to control cost is to get the system diagnosed correctly the first time. Replacing parts blindly can turn a manageable repair into a bigger bill.

A few practical steps:

• Have the pump inspected before replacing it
• Ask whether the pressure tank should be checked at the same time
• Confirm that the replacement pump is properly sized
• Ask about repair vs. replacement options
• Use a contractor that can handle both pump and related water-system work

That last point matters. Dunham does both pump work and filter work, so if your water issue is tied to pressure, sediment, odor, or staining, we can look at the whole system instead of sending you somewhere else. If your water also has hard water, rotten-egg smell, or iron staining, our water filtration and treatment service can help identify what is actually in the water.

Call Dunham for pump replacement help

If your well pump is failing, or you have no water and need a diagnosis, call Dunham Well Drilling at (863) 965-2881. We have been serving Polk County since 1950, and our full machine shop, pump experience, and 24/7 answering service help us handle pump problems the right way.