Open now: Mon–Fri · 7:30 AM – 4:30 PMLicensed Contractor · FGWA Member24/7 Answering Service(863) 965-2881

← Back to Blog

Can lightning damage a well pump or pressure tank?

Can lightning damage a well pump or pressure tank?

Lightning damage well pump systems are common in Central Florida, and yes, a strike can damage the pump, motor, pressure switch, control box, wiring, and sometimes the pressure tank or casing too.

How lightning damage affects a well pump system

A lightning strike does not have to hit the well itself to cause trouble. When lightning enters the electrical system, the surge can travel through the well pump circuit and damage components that are tied together by wiring and controls. In our shop, we see this kind of failure often after summer storms in Polk County and nearby areas.

The most common problems include:

  • Pump motor failure
  • Burned control boxes or pressure switches
  • Damaged wiring
  • Tripped breakers that won’t stay reset
  • Intermittent operation after the storm
  • Irrigation system electrical damage

If the pump stops running or starts acting erratically right after a storm, lightning is a likely cause. For well owners, that usually means the system needs a proper diagnosis before anything is replaced.

Signs your well pump or pressure tank may have lightning damage

A pressure tank itself is not usually the first part to fail from lightning, but the system around it can be affected. The tank may appear to be the problem when the real issue is electrical or control-related.

Common symptoms after a storm

Watch for these warning signs:

  • No water at the house or meter
  • Pump hums but does not start
  • Pump runs, but pressure never recovers
  • Rapid cycling on and off
  • Burnt smell near the pressure switch or control box
  • Visible scorch marks or melted wires
  • Breaker trips repeatedly
  • Low pressure only after the lightning event

If your well serves a home, farm, or mobile home park, those symptoms should be checked quickly. A damaged pump can sometimes be repaired, but lightning damage often affects more than one part of the system.

Why pressure tanks can seem damaged too

A pressure tank may not be struck directly, but it works with the pump, pressure switch, and electrical controls. If lightning damages the switch or control setup, the tank may be blamed because the system is no longer maintaining pressure correctly.

A few examples:

  • The switch may fail to tell the pump to start or stop
  • A burned control box may keep the pump from building pressure
  • Electrical damage may cause the pump to short-cycle, which stresses the tank
  • A failed pump can make the tank seem “bad” when it is still usable

That is why we recommend a full system check, not just a quick swap of one part. At Dunham, our Pump Repair & Installation work includes pressure tanks, residential pumps, irrigation pumps, and in-house rebuilds in our full-line machine shop.

What to do right after a lightning strike

If you suspect lightning damage, turn the system off and call for service. Do not keep resetting breakers or repeatedly cycling the pump. That can make the damage worse.

Safe first steps

  • Shut off power to the pump if you can do so safely
  • Avoid using a well system that is sparking, buzzing, or burning
  • Check for obvious signs of heat damage around the switch or panel
  • Do not open electrical components unless you are qualified
  • Call a licensed well contractor for diagnosis

We do not recommend DIY work involving electrical service, pressure tanks, or deeper well components. That is especially true after a storm, when hidden damage is common.

Why lightning damage is so common in Central Florida

Polk County and the surrounding Central Florida area see frequent lightning activity every season. That makes surge-related well problems a regular part of what we handle.

At Dunham Well Drilling, we provide Lightning Damage Repair for well systems, including:

  • Pump and motor repair after a lightning strike
  • Irrigation system electrical repair
  • Pressure-switch and control replacement
  • Well casing damage assessment
  • Insurance claim assistance

We also work directly with your insurance company on the claim, which can save time when you are dealing with a storm-related outage.

When a repair may not be enough

Sometimes the damage is limited to a switch, control box, or wiring run. Other times, the motor or pump is cooked and needs replacement. If the storm also affected the casing or other parts of the well system, the job can get more involved.

That is where experience matters. Dunham has been serving Central Florida since 1950, and we rebuild pumps and turbines in-house with our full-line machine shop. We also carry Goulds, Sta-Rite, Grundfos, and Schaefer pumps, both new and used, so we can match the right equipment to the system.

Why a proper diagnosis matters

A rushed replacement can miss the real problem. If the pressure tank, pressure switch, and pump are not evaluated together, the system may fail again. A careful inspection helps determine whether you need repair, replacement, or a combination of both.

Call Dunham for lightning-related well problems

If your water stopped after a storm, or your well pump, pressure tank, or irrigation system started acting up after lightning, call Dunham Well Drilling at (863) 965-2881. We offer a 24/7 answering service and return calls within 48 hours, and our team has the experience, machine shop, and insurance-claim support to handle lightning damage the right way.

Have a well or pump question?

Skip the form and call us. Our 24/7 answering service is always live.

Call (863) 965-2881
Call (863) 965-2881